Cross Technologies 2015-58T Manuál s instrukcemi stáhnout pdf (Strana 6)

B) Commands - Table 1.2 lists the commands for the 2015-58 and briefly describes them. After a command is

sent the 2015-58 sends a return “>” indicating the command has been received and executed.

General Command Format - The general command format is {aaCND...}, where:

{ = start byte

aa = Address (RS-485 only)

C = 1 character, either C (command) or S (status)

N = 1 character command of status request

D = 1 character or more of data (depends on command)

} = stop byte

* PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below,

should be used ONLY when R

S-485, (OPTION-Q), is selected.

Table 1.2 2015-58 Comman

Commands

Command Syntax Description

Set Transmitter Frequency {aaC1xxxxxxx}* where:

• xxxxxxx = 7 characters

• Range: 5850000 to 6425000 kHz, 1kHz steps

Set Input Level {aaCIxx}* where:

• xx = 2 characters

• Range: 10 to 35 (-10 dB to -35 dB, in 1 dB steps)

Set Transmit Gain {aaC3xxx}* where:

• xxx = 3 characters

• Range: 0 to 30 (0 dB to 30.0 dB, in 0.5 dB steps)

Enable Tx {aaCAx}* where x =:

• 0 to disable Tx signal

• 1 to enable Tx signal

Enable External 10MHz {aaCEx}* where x =:

• 0 to disable External 10MHz ref signal

• 1 to enable External 10MHz ref signal

Enable Remote # Just # sign

Disable Remote {aaCR0}* {CR and zero}

C) Status Requests - Table 1.3 lists the status requests for the 2015-58 and briefly describes them.

* PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below,

should be used ONLY when R

S-485, (OPTION-Q), is selected.

Table 1.3 2015-58 Status Reqquests

Requests

Command Syntax Description

Command Status {aaS1}* Returns {aaS1bbbbbbbccddddMEA} where:

• bbbbbbb = Tx frequency

• cc = Input Level

• dddd = Tx Gain

• M = Tx RF Status (1 = Normal, 0 = Muted)

• E = External Ref Status (1 = Ext Off, 0 = Ext On)

• A = Alarm Status (0 = NO Alarm, 1 = Alarm)

2015-58 Manual_Rev. F Page 6 06/10/14

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Komentáře k této Příručce

Žádné komentáře

Cross Technologies 2015-58T Manuál s instrukcemi Strana 6

Komentáře k této Příručce

Související produkty a manuály pro ne Cross Technologies 2015-58T